Releasing an EP Before New Year: 3-Week Plan
To get an EP out before New Year, plan backwards from the release date: files first, then metadata and upload, and promotion last. Below is a three-week schedule, the reasons to upload early, and what you can do in Magic Master.
Why upload early
Distributors and platforms recommend submitting a release two to four weeks before the release date. That buffer covers moderation and makes sure the release reaches the catalogue on time. Editorial playlists look at material even earlier, so if you are counting on them, the whole schedule moves further back.
Holidays can slow moderation, and that is exactly when to leave extra room. Check the exact timing and rules with your distributor. They vary, so follow their requirements page rather than anyone else's experience. Choose the release date before you start, and do not move it by a week or two: every shift pushes the whole chain of work and checks back.
Why three weeks
Three weeks is the minimum that lets the whole path run without rush: a week for the mix and mastering, a week for metadata, the upload and its check, and a week for promotion. If the final mix is not ready, the schedule shows the gap at once. Then it is easier to move the release date than to upload an unfinished record that cannot be corrected without a new round of moderation.
If you have less than three weeks, run the same steps and cut the promotion. Do not cut the upload window: moderation cannot be hurried by working faster yourself.
The three-week plan
| When | What to do | What you get |
|---|---|---|
| Week 1 (21–15 days out) | final mix of every track, track order, versions such as an instrumental; draft metadata and cover art | frozen WAV files and a list of versions |
| Weeks 1–2 | master all tracks to one loudness in album mode; check each master | a set of masters with a shared target |
| Week 2, no later than 14 days out | metadata, an ISRC for every version, 3000 × 3000 cover art, upload | release submitted |
| Week 3 (7–0 days out) | announcements, teasers, a pre-save link if your distributor provides one; check the release pages on the platforms | release is live and promotion runs |
Step 1. Freeze the final mix
Freeze the mix. From then on, any change becomes a new version with a new number. Compare the tracks with each other: is the top end equally bright, do the basses sit alike, does one track sound much quieter than its neighbours? Check every track in mono and on a phone.
Mastering aligns loudness and tone to a common target, but it will not make tracks with different characters sound alike. That character belongs to the mix, so fix any contested spots before mastering.
The order of the tracks should be settled before mastering, because it shapes how the EP will be heard. The first track makes the first impression, and the last one leaves the aftertaste. Sequence the tracks by energy and check each transition: tone, loudness and tempo at the joins should flow rather than jolt.
Step 2. Master all tracks to one loudness
Album mode suits an EP: the tracks go through as a batch, and their loudness is aligned to one target in LUFS, not in peaks. The LUFS differences should match what you intended, so a ballad meant to sit quieter than a club track stays quieter. Keep each master under a true-peak ceiling of −1 dBTP, and listen to the joins in sequence. For the method, see matching loudness across album tracks.
Step 3. Metadata, ISRC and cover art
Fill everything in before you upload, and check the spelling. The same title should look identical in every field.
- The EP title, each track title and each version name, such as an instrumental or a radio edit.
- Songwriters, performer, genre and the language of the lyrics.
- An explicit-content flag if the lyrics need one.
- An ISRC, which is a recording code: every version gets its own. A distributor or a national agency usually issues it, and you should confirm that every code is unique before you submit.
- The release code (UPC), which the distributor usually issues as well.
- Cover art: a 3000 × 3000 pixel square, saved as JPG or PNG. Keep important text close to the centre, because edges get cropped when the image is shrunk.
Choose the genre and the language of the lyrics from the distributor's lists rather than inventing your own labels. If the EP has collaborations, credit every performer the same way in every field. Check the lyrics against the recording: mismatched words are noticed by listeners and by anyone checking the release.
Step 4. Upload
Upload no later than 14 days before the release date, and earlier if you can. Before you submit, check every line of the form and listen to the exact files you are sending: listeners will hear what was uploaded. Changes after submission can trigger a new round of moderation, so do your checks before you press the button.
Holidays are a separate risk. Find out early how your distributor works over those dates, and do not leave the upload to the last day before the break. The sooner the files reach moderation, the less you depend on its speed during the holiday week.
Step 5. Promotion
In the week before release, announcements do the work: a short video with the strongest moment of a track, the cover and the date. If your distributor gives you a pre-save link, put it in the announcement early. In the final days, check the release pages on the platforms. The title, the cover and the track order should match what you submitted.
Teasers can go out earlier than that, but link to the release only once its page exists and opens. Otherwise the announcement sends people to nothing. For an EP, four elements are usually enough: an announcement with the cover and the date, a short video with the strongest moment of one track, a pre-save link if your distributor gives one, and a post that describes the EP without a pile of hashtags.
After you submit
After submission, follow the status in your distributor's dashboard. When the release is approved, open the platform pages and check everything against the checklist at the end of this article: title, track order, cover and metadata. If something does not match, contact the distributor straight away, not on the day of release. If moderation drags on, ask the distributor for the reason first: a second submission without asking can only muddy the situation.
How to do it in Magic Master
If you would rather not put the package together yourself, the Track ready for release page takes a pre-order request for a package that covers mastering and a check, delivered as a PDF. The request needs no payment, and you need to sign in to send it.
For an EP, album mode is the natural choice: the tracks go through as a batch, and one of them, the anchor track, sets the target loudness for the rest. Magic Master's platform presets set the targets, for example Spotify at −14 LUFS and Apple Music at −16 LUFS, and every preset keeps a true-peak ceiling of −1 dBTP. For background on those numbers, see what is LUFS.
Common mistakes
- Uploading a week before the date. Moderation does not finish in time, and the release comes out later than planned.
- One ISRC for the whole EP. Every version is a separate recording with its own code.
- Cover art below the required size. Such an image may be rejected, and it will look soft on a large screen.
- Loudness matched by peak. Every track ends up equally squashed and loses its character. Match by LUFS.
- Titles spelled differently. The metadata, the cover and the text must all use the same title.
- Holidays left out of the schedule. A two-week buffer disappears quickly once moderation slows down.
- An old master in the upload. After changes to the mix, the previous file often stays in the folder and is easy to send by mistake. Keep numbered versions and check what was actually uploaded before you submit.
Checklist before upload
| Item | Done |
|---|---|
| Final WAV files at 24 bits, no MP3 | |
| True peak of every master at or below −1 dBTP | |
| Loudness matched by LUFS, intended differences kept | |
| An ISRC for every version | |
| Cover art at 3000 × 3000 | |
| Titles match in the metadata, on the cover and in the text | |
| Upload no later than 14 days before release | |
| Announcement link ready |
Questions and answers
When should I upload an EP to a distributor before New Year?
Distributors and platforms recommend submitting a release two to four weeks before the release date, and editorial playlists look at material even earlier. Check the exact timing and requirements with your own distributor, because they differ from one to another.
Does each track on an EP need its own ISRC?
Yes. The ISRC is a recording code, and every version gets its own: an instrumental, a radio edit or a remix each need a separate code. A distributor or a national agency usually issues it, and you should confirm that every code is unique before you upload.
What cover art size do I need for a release?
A square of 3000 by 3000 pixels, saved as JPG or PNG. Large platforms accept that size, while a smaller image can be rejected or look soft on a large screen.
Should I master the EP tracks one by one or as a set?
As a set, in one batch: the loudness is aligned to a single target, and the differences you intended between tracks stay. For the method, see matching loudness across album tracks.
What is the 'Track ready for release' package in Magic Master?
It is a pre-order request for a package that covers mastering and a check, delivered as a PDF. Submitting the request needs no payment, and you need to sign in to send it.
Upload a track — the same mastering engine, prices in euros.
Open Echoteka →AI mastering onlineLUFS analyzer