Mastering and mixing basics
Mixing and mastering are different jobs that are often confused. Mixing balances the separate tracks into one stereo file. Mastering prepares that finished mix for release: loudness, tonal balance, peak headroom and the file format the platform expects.
This hub gathers the basics for anyone who masters their own music or wants to understand what a mastering engineer delivers. Start with the glossary, then read about headroom, bit depth and file formats, multiband compression, and the order of the work from a clean mix to a final master. Each article explains a term through what you hear and what a meter shows, so you can check your own file rather than trust a label.
If you are just starting, read in this order: the glossary, then headroom and file formats, then the processing articles. Advanced topics such as multiband compression make more sense once the basic steps feel familiar.
Articles on this topic
Mix Problems Mastering Can't Fix, and How to Check
November 8, 2026Mix problems mastering will not fix: clipping, an over-compressed mix, a buried vocal, low-end mud and room echo. How to spot them before mastering.How to Mix and Master a Song Online Free: a Realistic Guide
August 17, 2026Mix and master online for free: what works in a browser, where free tools hit limits, and a 15-minute workflow to a release-ready track.Download Your Master as WAV, MP3 or FLAC — After Mastering
July 28, 2026Pick the output format after mastering: download the same master as WAV, MP3 or FLAC with no re-processing and no tokens spent. Which format fits which job.16 vs 24 bit: which master to deliver
July 26, 2026What 24-bit actually changes in practice, why dithering belongs only on the way down, and why more bits will not make a master louder.Your track sounds dull after mastering? The cause is input level
July 25, 2026Track sounds dull, thin or boxy after mastering? The usual cause is a hot input level. How gain staging before mastering keeps tone and stereo image intact.AI Mixing vs Mastering: Why AI Mixing Barely Exists
July 18, 2026Mixing and mastering are different jobs: why full AI mixing of multitrack projects is not really here yet, and what a Suno or Udio track needs.What Is Headroom and Why It Matters in Mastering
July 16, 2026Headroom: the free space between a signal's peak and 0 dBFS. Why −3 dB of headroom is critical, how to measure it, and what to watch out for in a mix.Mastering vs. Mixing: What's the Actual Difference
July 16, 2026Mixing vs. mastering explained: different goals, tools, and order of operations. Where mixing ends and mastering begins, with a full comparison table.Audio Mastering Glossary: LUFS, True Peak, LRA and Dithering
July 16, 2026Complete audio mastering glossary: LUFS, dBFS, True Peak, LRA, compression, limiting, EQ, stereo imaging. Clear definitions for musicians and producers.Multiband Compression Explained: The Complete Mastering Guide
June 28, 2026How multiband compression works in mastering. Crossovers, ratio, knee, upward compression. Practical settings for EDM, rock, jazz, and podcasts.Audio Mastering for Beginners: What It Is and Where to Start
June 28, 2026A complete beginner's guide to audio mastering. What LUFS, True Peak, and compression are. A step-by-step processing workflow. Free tools included.AAC vs MP3: Which Is Better? Lossless Formats Explained
June 28, 2026A comparison of audio formats for mastering. WAV vs. FLAC vs. MP3 vs. AAC. Which format to choose for streaming, CD, vinyl, and podcasts.
Other topics: AI music and AI mastering · Loudness for platforms · Restoration and cleanup
Upload a track — the same mastering engine, prices in euros.
Open Echoteka →AI mastering onlineLUFS analyzer